Manual:
When set to manual, animal weighing must be initialized manually by pressing the “F” key.
4. Once the animal weighing process is initialized, the scale will display
the time interval that was selected in the configuration mode and
begin counting down. During the time interval the scale will record
weight readings of the animal and calculate its average weight.
5. After the time interval has elapsed the result will be displayed. The
animal can now be removed from the pan.
6. Clear the display.
Automatic:
When set to Automatic, the result will be automatically cleared after
the animal is removed. The scale will perform an automatic tare and
prepare for the next weighing.
Note: If the weighing container is changed the scale must be tared manually by pressing the “T” key.
To Next Page
Loading...
