Greensmaster 3300/3400 Page 7 -- 2 1 Chassis
Disassembly (Fig. 17)
1. Parkmachineonalevelsurface,engagetheparking
brake, lower the cutting units and stop the engine. Re-
move key from the ignition switch.
2. Remove grass basket from suspension assembly.
3. Removecuttingunitfromsuspensionassembly(see
Traction Unit Operator’s Manual).
4. Disassembly crossarm assembly as required using
Figure 17 as a guide.
NOTE: The flange head screws (item 13) used to se-
curethebaskethorn(item12)tothecrossarmassembly
have a patch lock to prevent loosening of the screws. If
screws are removed, replace screws.
Assembly (Fig. 17)
1. Assemble crossarm assembly using Figure 17 as a
guide.
2. Install cutting unit to suspension assembly (see
Traction Unit Operator’s Manual).
3. Install grass basket.
Chassis
To Next Page
Loading...
