Toro Greensmaster TriFlex 3400 - General Information; Cutting Unit Operators Manual; Supporting Cutting Unit When Servicing

Greensmaster 3300/3400
DPA Cutting Units
Page 8 -- 3
General Information
Cutting Unit Operator’s Manual
The Cutting Unit Operator’s Manual provides informa-
tion regarding the operation, general maintenance and
maintenance intervals for the DPA cutting units on your
Greensmaster TriFlex machine. Additionally, if optional
kits have been installed on the cutting units (e.g. rear
roller brush), the installation instructions for the kit in-
cludesset--upandoperationinformation.Refertothose
publications for additional information when servicing
the cutting units.
Supporting Cutting Unit when Servicing
Wheneverthecuttingunithastobetippedtoexposethe
bedknife or cutting reel, support the rear of the cutting
unittomakesurethelocknutsonthebackofthebedbar
adjuster screws are not resting on the work surface.
1. Lock nut 2. Support
Figure 2
1
1
2
DPA Cutting
Units