Greensmaster 3300/3400Page 7 -- 22Chassis
Cutting Unit Suspension Assembly
1. Suspension assembly (3 used)
2. Flange screw (3 per suspension)
3. Basket
4. Clevis pin (3 used)
5. Cotter pin (3 used)
6. Washer (3 used)
7. LH spring retainer (3 used)
8. Lift cylinder
9. RH stabilizer spring
10. LH stabilizer spring
11. Spacer (6 used)
12. Cap screw (6 used)
13. Flange nut (6 used)
14. Flange head screw (6 used)
15. RH spring retainer (3 used)
Figure 18
FRONT
RIGHT
55 to 60 ft--lb
(75to81N--m)
6
4
1
3
2
5
9
10
13
14
7
11
12
15
8
NOTE: Three (3) identical cutting unit suspension as-
semblies are usedon Greensmaster TriFlex machines.
The cutting unit attaches to the cross a rm assembly
which is attached to the frontofthe cutting unit suspen-
sionassembly.Thecrossarmassemblycanbeserviced
with the suspension assembly attached to the machine
(see Cutting Unit Suspension Crossarm Assembly in
this section).
To Next Page
Loading...
