Toro Greensmaster TriFlex 3400 - Cutting Unit Suspension Crossarm Assembly

Greensmaster 3300/3400Page 7 -- 20Chassis
Cutting Unit Suspension Crossarm Assembly
1. Crossarm
2. Flange bushing (4 used)
3. Link (4 used)
4. Lock nut (4 used)
5. LH crossarm mount
6. RH crossarm mount
7. Pivot pin (2 used)
8. Lever (2 used)
9. Spring (2 used)
10. Pivot pin (2 used)
11. Socket head screw (8 used)
12. Basket horn (2 used)
13. Flange head screw (4 used)
14. Suspension steering head
Figure 17
8
9
10
7
12
1
6
4
2
2
3
3
11
4
4
4
5
13
11
14
FRONT
RIGHT
NOTE: Three (3) identical cutting unit suspension as-
semblies are usedon Greensmaster TriFlex machines.
The cutting unit attaches to the cross a rm assembly
which is attached to the frontofthe cutting unit suspen-
sion assembly.