Af x for non-CE machines
decal125-6135
125–6135
Af x over Part No. 134-0539 for non-CE machines
decal134-1986
134-1986
1. W arning—read the Operator ’ s Manual .
5. Thrown object hazard—keep bystanders away .
2. W arning—all operators should be trained before operating
the machine.
6. Cutting/dismemberment hazard of hand or foot—stay away
from moving parts; keep all guards and shields in place.
3. W arning—always wear a seatbelt when operating the
machine.
7. T ipping hazard—lower the cutting units when moving downhill;
drive slowly when turning; do not turn sharply while traveling
fast.
4. W arning—wear hearing protection.
8. W arning—engage the parking brake, shut of f the engine, and
remove the key before leaving the machine.
1 1
To Next Page