decal134-8866
134-8866
Note: This machine complies with the industry standard stability test in the static lateral and longitudinal tests with the maximum
recommended slope indicated on the decal. Review the instructions for operating the machine on slopes in the Operator ’ s Manual as
well as the conditions in which you would operate the machine to determine whether you can operate the machine in the conditions on
that day and at that site. Changes in the terrain can result in a change in slope operation for the machine.
1. W arning—read the Operator ’ s Manual .
5. Thrown object hazard—keep bystanders away .
2. W arning—all operators should be trained before operating
the machine.
6. Cutting/dismemberment hazard of hand or foot—stay away
from moving parts; keep all guards and shields in place.
3. W arning—always wear a seatbelt when operating the
machine.
7. T ipping hazard—when driving down slopes, lower the mower
deck; do not use on slopes greater than 12°.
4. W arning—wear hearing protection.
8. W arning—engage the parking brake, shut of f the engine, and
remove the key before leaving the machine.
decal134-8769
134-8769
1. PT O—Of f
4. Deck—raise
2. PT O—On 5. Slow
3. Deck—lower 6. Fast
12
To Next Page