Toro ProLine H800 - Jacking Instructions; Raising the Front of the Machine

JackingInstructions
CAUTION
Failingtoproperlysupportthemachinewithappropriatejackstands
cancausethemachinetomoveorfallandcanresultinpersonal
injury.
Whenchangingtheattachments,tires,orperformingotherservices,
dothefollowingsteps:
•Usecorrectblocks,hoists,andjackstoraiseandsupportthe
machine.
•Parkthemachineonasolidlevelsurface,suchasaconcrete
oor.
•Beforeyouliftthemachine,removealltheattachmentsthatmay
interferewiththesafeandcorrectliftofthemachine.
•Alwaysblockthewheelswithchocks.
•Useappropriatejackstandstosupporttheraisedmachine.
•Donotusethecuttingdeckasajackingpoint.
RaisingtheFrontoftheMachine
1.Settheparkingbrakeandblockthe2rearwheelswithchockstoprevent
themachinefrommoving.
g215339
Figure1
1.Handle2.Latch
2.Accessrightsideoftheengineasfollows:
A.Pushthelatchontheradiatorinwardtowardtheradiator(Figure1).
B.Usingthehandleonthesideoftheradiator,rotatetheradiatortoaccess
rightsideoftheengine(Figure1).
ProLineH800
Page1–7
Safety:JackingInstructions
19241SLRevB