Toro ProLine H800 - Service and Repairs; Wheels

ServiceandRepairs
Wheels
g289305
Figure144
1.Rearwheelhub4.Rearwheelassembly7.Frontwheelhub
2.Rearwheellugbolt5.Frontwheelassembly
3.Washer6.Frontwheellugnut
RemovingtheWheels
1.Parkthemachineonalevelsurface,lowerthecuttingdeck,shutoffthe
engine,settheparkingbrake,andremovethekeyfromthekeyswitch.
2.Blockthewheelsthatarenotremovedwithchockstopreventthemachine
frommoving.
3.Loosen,butdonotremovethewheel-lugnutsorboltsthatattachthewheel
tothemachine.
IMPORTANT
Beforeliftingthemachinewithajack,reviewandfollowJacking
Instructions(page1–7).
4.Liftthemachinewithajackuntilthewheeltoberemovedisofftheground.
Supportthemachinewithappropriatejackstands.
5.Removethewheel-lugnutsorboltsthatattachthewheeltothemachine,
andremovethewheel.
ProLineH800
Page7–3
Chassis:ServiceandRepairs
19241SLRevB