Toro ProLine H800 - Seat Switch

SeatSwitch
g289939
Figure123
1.Bellows
6.Cableties
11.Blindrivet
2.Springpack
7.Blindrivet
12.Switchingbracket
3.Seatlevelindicatorhousing
8.Seatswitchwithcable13.Backrestframe
4.Cover
9.Bushing
5.Switchplate10.Compressionsprings
Theseatswitchnormallyopenandcloseswhentheoperatorisontheseat.If
thetractionsystemorPTOswitchisengagedwhentheoperatorraisesoutof
theseat,theengineshutsoff.Theseatswitchanditselectricalconnectorare
locateddirectlyundertheseat.Testingoftheswitchcanbedonewithoutseat
removalbydisconnectingtheseatwirefromthemachinewireharness.
TheElectronicControlUnit(ECU)monitorstheoperationoftheseatswitch.
TestingtheSeatSwitch
1.Parkthemachineonalevelsurface,lowerthecuttingdeck,settheparking
brake,andshutofftheengine.
2.EnsurethatthekeyswitchisintheOFFposition.Locatetheswitchfor
testing.
ElectricalSystem:TestingtheElectricalComponents
Page6–26
ProLineH800
19241SLRevB