Toro ProLine H800 - Servicing the Driveshaft

ServicingtheDriveshaft
g290288
Figure165
1.Endyoke
3.Greasetting5.Sliptubeyoke
2.Universaljointkit(crossand
bearing)
4.Slipshaftyoke
6.Endyoke
DisassemblingtheDriveshaft
1.RemovethePTOdriveshaftfromthemachine;refertoRemovingthePTO
Driveshaft(page8–18).
g290289
Figure166
1.Endyoke
4.Greasetting
2.Crossandbearingkit5.Shaftyoke
3.Snapring
2.Removethesnaprings(3)thatsecuresthecrossandbearingkitintheyokes.
IMPORTANT
Supporttheyokeswhenremovingandinstallingthebearingsto
preventdamage.
3.Useapresstoremovethecrossandbearing(2)fromtheyokes.
4.Cleanthedriveshaftyoke(5)andendyoke(1).
5.Inspectthedriveshaftyoke(5)andendyoke(1)forwear,pittingorother
noticeabledamage.Replacethepartsthatarewornordamaged.
AxleandPTO:ServiceandRepairs
Page8–20
ProLineH800
19241SLRevB