Toro ProLine H800 - Page 151

RemovingtheHydraulicPumpAssembly
CAUTION
Beforeopeningthehydraulicsystem,operateallthehydraulic
controlstoreleasesystempressureandavoidinjuryfromthe
pressurizedhydraulicuid;refertoReleasingPressurefromthe
HydraulicSystem(page5–5).
1.Parkthemachineonalevelsurface,settheparkingbrake,lowerthecutting
deck,shutofftheengine,andremovethekeyfromthekeyswitch.
2.Removethetractionneutralarmassembly;refertoRemovingtheTraction
NeutralArmAssembly(page5–81).Carefullypositionthetractioncontrol
cableawayfromthehydraulicpumpassembly.
3.ReadtheGeneralPrecautionsforRemovingandInstallingtheHydraulic
SystemComponents(page5–63).
4.Cleanthehydraulicpumpandallhydraulicconnectionstopreventhydraulic
systemcontamination.
5.Forassemblypurposes,labelallthehydraulicconnections.
g292559
Figure71
1.Hydraulicpump6.Hose
2.O-ring
7.Hydraulicmotor
3.Fitting8.Fitting
4.Tttingadaptor
9.Hose
5.Pressureportplug10.Hose
ProLineH800
Page5–83
HydraulicSystem:ServiceandRepairs
19241SLRevB