Toro ProLine H800 - Page 165

RemovingtheRearWheelMotor(continued)
6.Removetherearwheelfromthemachine;refertoRemovingtheWheels
(page7–3).
7.Removewheelhubfromtherearwheelmotorasfollows:
IMPORTANT
Donothitthewheelhub,wheel-hubpuller,orwheelmotorwitha
hammerwhileremovingorinstalling.Hammeringcandamagethe
wheelmotor.
A.Ensurethatthelocknutonthewheelmotorshaftisloosenedatleast
2turns.
B.Useawheelhubpuller(refertoSpecialT ools(page2–15))toloosenthe
wheelhubfromthewheelmotor.
C.Removethelocknutandwheelhubfromthemotorshaft.Discardthe
locknut.
D.Locateandretrievethewoodruffkey(item4inFigure79)fromthewheel
motorshaft.
ProLineH800
Page5–97
HydraulicSystem:ServiceandRepairs
19241SLRevB