Toro ProLine H800 - Drive System Maintenance; Torquing the Wheel Lug Nuts; Maintaining the Rear Wheel Alignment; Adjusting Steering Stops

RemovingtheFuelTank
g289124
Figure19
1.Bolt5.Nut9.Bolt
2.Washer
6.Crossrail
10.Fueltanksupport
3.Nut7.Rubbergrommet11.Fueltank
4.Washer8.Bolt
1.Parkthemachineonalevelsurface,lowerthecuttingdeck,shutoffthe
engine,settheparkingbrake,andremovethekeyfromthekeyswitch.
2.Raiseandlockthehopperassembly;refertoOperator’sManual.
3.Removethebatterynegativecablefromthenegativepostofthebattery.
4.Allowtheenginetocompletelycool.
5.Unplugthewireharnessconnectionsoffueltankoat.
6.Useafueltransferpumptoremovethefuelfromthefueltankandintoa
certiedfuelstorage.
7.Loosenthehoseclampsandcarefullydisconnectthefuelhosesfromthe
fueltankoatontopofthefueltank.
Note:Beforeremovingthefuelhosesfromthefueltank,labelthehosesfor
assemblypurposes.
ProLineH800
Page4–13
Engine:ServiceandRepairs
19241SLRevB