Toro reelmaster 5410 series - Page 178

TestProcedure(continued)
CAUTION
Beforeopeninghydraulicsystem,operateallhydrauliccontrolsto
relievesystempressureandavoidinjuryfrompressurizedhydraulic
uid;refertoReleasingPressurefromtheHydraulicSystem(page
6–8).
Note:IfmachineisequippedwithoptionalCrossTraxAWD,reverserelief
pressuretestportsarelocatedonCrossTraxhydraulicmanifold.
g230033
Figure81
2-wheeldrivemachine
1.Rightwheelmotor3.Forwardtestport
2.Leftwheelmotor
4.Reversetestport
g230034
Figure82
2-wheeldrivemachine
1.Forwardtestport2.Reversetestport
3.Cleantractioncircuittestportonhydraulictubefordirectiontobechecked
(Figure81).Connecta35,000kPa(5,000psi)pressuregaugetotestport.
4.Afterinstallingpressuregauge,startengineandrunatlowidlespeed.
Checkforanyhydraulicleakagefromtestconnectionsandcorrectbefore
proceedingwithtest.
HydraulicSystem:TestingtheHydraulicSystem
Page6–60
Reelmaster
®
5410/5510/5610Series
15216SLRevC