Toshiba B-EP Series - Page 225

CHAPTER 5 TPCL-LE MODE (INTERFACE COMMANDS)
B-EP Series
5-55
G: Price Font 3 (POP Font)
(5) Fine adjustment of character-to-character space
If no character-to-character space is specified or the number of space dots between
characters is 0, drawing will take place according to the horizontal spacing/proportional
spacing determined for each character.
If character-to-character space is specified, drawing will take place according to the value
obtained by adding the character spacing/proportional spacing to the specified value.
When justify is selected for the alignment, the character-to-character space setting is
invalid.
(The horizontal spacing/proportional spacing is increased or decreased depending on the
character size.)
A B C
A B C