CHAPTER 5 TPCL-LE MODE (INTERFACE COMMANDS)
B-EP Series
5-191
5.12.2 SAVE TERMINATE COMMAND [ESC] XP
Function Declares the termination of saving PC interface commands.
Format [ESC] XP [LF] [NUL]
Note
(1) When further storing operation is not continued for about 10 seconds after storing the PC
interface commands, the printer enters the online mode (label issue operation). In this
case, the image buffer is automatically cleared.
Refer to • Save Start Command ([ESC] XO)
To Next Page
Loading...
