Toshiba B-EP Series - 5.6.8 TWO-DIMENSIONAL CODE FORMAT COMMAND (PDF417)

CHAPTER 5 TPCL-LE MODE (INTERFACE COMMANDS)
B-EP Series
5-113
5.6.8 TWO-DIMENSIONAL CODE FORMAT COMMAND (PDF417) [ESC] XB
Format c [ESC] XBaa; bbbb, cccc, d, ee, ff, gg, h, iiij (= jjj ------ jjj) [LF] [NUL]
d [ESC] XBaa; bbbb, cccc, d, ee, ff, gg, h, iiii (; kk
1,
kk
2,
kk
3,
------ , kk
20
) [LF] [NUL]
Term aa: Two-dimensional code number
00 to 31
bbbb: X-coordinate of the print origin of the two-dimensional code
Fixed at 4 digits (in 0.1 mm units)
cccc: Y-coordinate of the print origin of the two-dimensional code
4 or 5 digits (in 0.1 mm units)
d: Type of two-dimensional code
P: PDF417
ee: Security level
00: Level 0
01: Level 1
02: Level 2
03: Level 3
04: Level 4
05: Level 5
06: Level 6
07: Level 7
08: Level 8
ff: 1-module width
01 to 10 (in units of dots)
gg: No. of columns/rows
01 to 30
h: Rotational angle of two-dimensional code
0: 0°
1: 90°
2: 180°
3: 270°
iiii: Bar height
0000 to 0100 (in 0.1 mm units)
jjj-----jjj: Data string to be printed (Omissible)
Max. 2,000 digits
kk
1
, kk
2
, kk
3
, ------, kk
20
: Link field No. (Omissible)
01 to 99 (1 to 99 can also be used.)
Up to 20 fields can be designated using commas.