Toshiba B-EP Series - 6.13.3 MODE INFORMATION ACQUIRE COMMAND

CHAPTER 6 LABEL MODE (INTERFACE COMMANDS)
B-EP Series
6-81
6.13.3 MODE INFORMATION ACQUIRE COMMAND [ESC] WX
Function Sends the printer mode information to the host.
Format [ESC] WX [LF] [NUL]
Explanation (1) The status when the compatible mode for the B-SP series is on differs from the
status when the compatible mode is off.
(2) The mode information format to be sent to the host, is as follows:
• When the compatible mode for the B-SP series is off.
LABEL mode (Mode = 0)
Batch issue mode
[IrDA: TEC Protocol]
STX
Mode information (16 bytes)
CRC CRC
L A B E L SP SP SP SP SP SP SP SP SP SP SP
02H 4CH 41H 42H 45H 4CH 20H 20H 20H 20H 20H 20H 20H 20H 20H 20H 20H xxH xxH
[IrDA: IrCOMM, IrDA: IrOBEX, USB, RS-232C, Bluetooth, Wireless LAN]
STX
Mode information (16 bytes)
L A B E L SP SP SP SP SP SP SP SP SP SP SP
02H 4CH 41H 42H 45H 4CH 20H 20H 20H 20H 20H 20H 20H 20H 20H 20H 20H
Strip issue mode
[IrDA: TEC Protocol]
STX
Mode information (16 bytes)
CRC CRC
L A B E L ( S ) SP SP SP SP SP SP SP SP
02H 4CH 41H 42H 45H 4CH 28H 53H 29H 20H 20H 20H 20H 20H 20H 20H 20H xxH xxH
[IrDA: IrCOMM, IrDA: IrOBEX, USB, RS-232C, Bluetooth, Wireless LAN]
STX
Mode information (16 bytes)
L A B E L ( S ) SP SP SP SP SP SP SP SP
02H 4CH 41H 42H 45H 4CH 28H 53H 29H 20H 20H 20H 20H 20H 20H 20H 20H