Toshiba B-EP Series - 8.10.13 30-DOT LINE FEED LENGTH SET COMMAND

CHAPTER 8 ESC/POS MODE (INTERFACE COMMANDS)
B-EP Series
8-25
8.10.13 30-DOT LINE FEED LENGTH SET COMMAND [ESC] 2
Function Sets a line feed length to 30 dots.
203 dpi: 0.125 mm/dot
Format ASCII: ESC 2
Hex: 1Bh 32h
Explanation (1) Line feed lengths can be independently specified in standard and page modes.
Reference Minimum Dots for Line Feed Length Set Command ([ESC] 3)