Toshiba B-EP Series - 8.10.16 INITIALIZE COMMAND

CHAPTER 8 ESC/POS MODE (INTERFACE COMMANDS)
B-EP Series
8-28
8.10.16 INITIALIZE COMMAND [ESC] @
Function Clears data in the currently expanded image buffer, and initializes the settings.
Format [ESC] @
Term ASCII: ESC @
Hex: 1Bh 40h
Explanation (1) The data and macro definition in the receive buffer are maintained.
(2) Please refer to the next page for further information regarding the data to be
initialized.
[Program example]
fprintf( stdprn, "\033!%c", 0x20 ); /* Double width */
fprintf( stdprn, "11111\n");
/*Other settings*/
fprintf( stdprn, "\033@" ); /* Initializing printer */
fprintf( stdprn, "22222\n");
[Print example]
11111
2 2 2 2 2
←
All settings are reset to default values.