Toshiba B-EP Series - 8.10 ESC;POS COMMANDS; 8.10.1 HORIZONTAL TAB COMMAND

CHAPTER 8 ESC/POS MODE (INTERFACE COMMANDS)
B-EP Series
8-8
8.10 ESC/POS COMMANDS
8.10.1 HORIZONTAL TAB COMMAND [HT]
Function Moves a print position to the next horizontal tab position.
Format ASCII: HT
Hex: 09h
Default Every 8 characters of font A (9th, 17th digit…)
Explanation (1) This command will be ignored if the next horizontal tab position is not specified.
(2) The Horizontal Tab Positions Set Command ([ESD] D) must be used to specify a
position of a horizontal tab.
[Program example]
fprintf( stdprn, "01234567890123456789012345678901234\n");
for( i=0; i<4; i++ ) {
fputc( '\t', stdprn ); /* Horizontal tab */
fputc( 'H', stdprn );
}
fputc( '\n', stdprn );
[Print example]: Default horizontal tab position
0 1 2 3 4 5 6 78 9 0 1 2 345678901234567 8 9 0 1 2 34
H H H H
Reference Horizontal Tab Positions Set Command ([ESD]D)