CHAPTER 5 TPCL-LE MODE (INTERFACE COMMANDS)
B-EP Series
5-204
5.15.3 MODE INFORMATION ACQUIRE COMMAND [ESC] WX
Function Sends the printer mode information to the host.
Format [ESC] WX [LF] [NUL]
Explanation
(1) The status when the compatible mode for the B-SP series is on differs from the status
when the compatible mode is off.
(2) The mode information format to be sent to the host, is as follows:
• When the compatible mode for the B-SP series is off.
TPCL mode (Mode = A)
Batch issue mode
[IrDA: TEC Protocol]
STX Mode information (16 bytes) CRC CRC
T P C L SP SP SP SP SP SP SP SP SP
02H 54H 50H 43H 4CH 20H 20H 20H 20H 20H 20H 20H 20H 20H xxH xxH
[IrDA: IrCOMM, IrDA: IrOBEX, USB, RS-232C, Bluetooth, Wireless LAN]
SOH STX Mode information (16 bytes) ETX EOT CR LF
T P C L SP SP SP SP SP SP SP SP SP
01H 02H 54H 50H 43H 4CH 20H 20H 20H 20H 20H 20H 20H 20H 20H 03H 04H 0DH 0AH
Strip issue mode
[IrDA: TEC Protocol]
STX Mode information (16 bytes) CRC CRC
T P C L SP ( S ) SPSPSPSPSP
02H 54H 50H 43H 4CH 20H 28H 53H 29H 20H 20H 20H 20H 20H xxH xxH
[IrDA: IrCOMM, IrDA: IrOBEX, USB, RS-232C, Bluetooth, Wireless LAN]
SOH STX Mode information (16 bytes) ETX EOT CR LF
T P C L SP ( S ) SP SP SP SP SP
01H 02H 54H 50H 43H 4CH 20H 28H 53H 29H 20H 20H 20H 20H 20H 03H 04H 0DH 0AH
To Next Page
Loading...
