CHAPTER 6 LABEL MODE (INTERFACE COMMANDS)
B-EP Series
6-41
6.5.9 two-dimensional CODE FORMAT COMMAND
(PDF417) [ESC] XB
Function Sets the format to indicate the position on the label, at which the two-dimensional code
is to be printed and how it is to be printed.
Format [ESC] XBaa; bbbb, cccc, d, ee, ff, gg, h, iiii, jj, k, l [LF] [NUL]
Term aa: Two-dimensional code No.
00 to 99
(The same No. must not be used in one form for the bit map font field, the
outline font field, and the two-dimensional code field.)
bbbb: Print origin of X-coordinate of two-dimensional code
Fixed at 4 digits (in 0.1 mm units)
cccc: Print origin of Y-coordinate of two-dimensional code
Fixed at 4 digits (in 0.1 mm units)
d: Type of two-dimensional code
P: PDF417
ee: Security level
00: Level 0
01: Level 1
02: Level 2
03: Level 3
04: Level 4
05: Level 5
06: Level 6
07: Level 7
08: Level 8
ff: 1-module width
02 to 03 (in units of dots)
gg: No. of columns (strings)
01 to 30
h: Rotational angle of two-dimensional code
0: 0°
1: 90°
2: 180°
3: 270°
iiii: Bar height
0001 to 0100 (in 0.1 mm units)
To Next Page
Loading...
