EasyManua.ls Logo

Toshiba B-EP Series - Page 369

Toshiba B-EP Series
788 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CHAPTER 5 TPCL-LE MODE (INTERFACE COMMANDS)
B-EP Series
5-199
[IrDA: IrCOMM, IrDA: IrOBEX, USB, RS-232C, Bluetooth, Wireless LAN]
SOH STX Status Remaining No. of labels ETX EOT CR LF
01H 02H 3xH 3xH 3xH 3xH 3xH 3xH 3xH 03H 04H 0DH 0AH
Detailed status is indicated in 2-byte data.
“00”: Normal state
“01”: Cover open state
“02”: Operating
“04”: Pause state
“05”: Wait for strip
“06”: Command syntax error (including Ir packet error)
“09”: Normal issue end + Label end
“11”: Paper jam
“13”: Label end
“15”: Cover open error
“17”: Broken head dots error
“18”: Thermal head excessive temperature
“19”: Ambient temperature error
“32”: Abnormal battery temperature
“33”: Battery excessive temperature
“36”: Low battery
“37”: Charging error
“39”: Bluetooth setup error (including initialization error)
(“40”: Normal issue end) Response status for automatic status
transmission
(“41”: Normal feed end) Response status for automatic status
transmission
“45”: Wait for battery recovery
“46”: Wait for head temperature reduction
“47”: Wait for motor temperature reduction
“50”: Flash ROM write error
“51”: Flash ROM erase error
“54”: Flash ROM storage area full state
“55”: Writable character/PC command save mode
Remaining No. of labels (“0000” to “9999”)
Status type
“1” (31H): Status Request Command
“2” (32H): Automatic status transmission

Table of Contents

Other manuals for Toshiba B-EP Series

Related product manuals