10
3. The [Windows Components Wizard] screen appears.
Check [Management and Monitoring Tools], then click
[Details…].
4. The [Management and Monitoring Tools] screen
appears. Check [WMI SNMP Provider] and
[Simple Network Management Protocol], then click
[OK].
5. The [Management and Monitoring Tools] screen
closes. Click [Next] on the [Windows Components
Wizard] screen.
6. The [Configuring Components] screen appears and
the installation begins.
Follow the instructions on the screen to complete the
installation.
Before starting the installation, prepare the Windows
installation CD-ROM which may be required during the
installation.
To Next Page
Loading...
