62
Starting Downloader Using [Start] Button
This section describes the procedure to start the Downloader without using the Surveillance Tool.
Both of the Administrator and the User can start the Downloader by using this procedure.
1. Click: [Start] – [All Programs] – [TOSHIBA TEC] – [TEC Barcode Network Tool] –
[TEC Barcode Net Loader] to start the Downloader.
2. The [Printer selection] screen appears.
To automatically search the printer, please click
[Printer Search].
To manually search the printer, please click [Add Printer..]
For details of the screen, please refer to
‘Screens Displayed and Used by This Feature’.
3. Make sure the check box at the left side of the model
name is checked (
)
, then click
[OK].
Clicking [OK] with the several different printer models
selected displays the following error message:
“You are selecting the several different printer models.
Please select only one printer model. “
Check the check box (
) for the same printer models and
click [OK].
4. The printer is shown in the [Printer:] area of the Main
screen.
Clicking displays the [Select file to download] screen.
Clicking [DOWNLOAD START] displays the [Download]
screen, and starts downloading a file.
For details of the screen, please refer to
‘Screens Displayed and Used by This Feature’.
5. Now you can start downloading.
Please go to Step 1 in ‘Downloading Operation’.
To Next Page
Loading...
