26
By Specifying IP Address
When the [Search] function described in the previous section is used, printers, which do not have to be monitored,
may also be searched. To avoid this situation, using an IP address can add only the desired network printers to
the Printer List. (An IP address of a non-printer device can be specified, but [
Unknown] will be displayed
under [Status] in the List View screen.)
1. Select [TECNet View], and List View (TEC Barcode
Net View)(Page 28) starts.
The [Add] function is available even when the Surveillance
Tool is logged in in User mode.
2. Click: [Device] – [Add].
Clicking the
button in the tool bar does the same
operation.
3. The [Add Printer] screen appears.
Enter an IP address, then click [OK].
The IP address entered is added to the Printer List.
4. A printer specified by the IP address is added.
One IP address can be added at a time.
When specifying several IP addresses, follow the procedure
for all IP addresses.
IP address must be different for each printer.
Up to 50 printers can be added on the Printer List.
To Next Page
Loading...
