Toshiba E-studio18 - How to Set Scan Options; Setting Scan Options

4 SCAN FUNCTIONS
116 How to Set Scan Options
How to Set Scan Options
When you scan the original, you can make various options to affect the scanning status. You can save different sets of
options in files and recall one of them for frequent use.
 Setting scan options
The basic and advanced dialogs are available for the scan operation.
 Basic scan dialog
When you execute the image acquisition command from within the TWAIN-compatible application, the following basic
scan dialog appears.
1) Easy Set
The scan options can be saved.
 P.118 “Using the Easy Set feature”
2)
Click this icon to clear the preview image.
3) Preview screen
The pre-scanned image appears in the preview screen area. The dotted boundary shows the scanning area or the
original size. The image information appears under the preview screen.
4)
Click this icon to show the version information of the scanner driver.
5)
Click this icon to show the Help information about this scanner driver.
6) [Close]
Click this button to quit the scanning operation.
7) [Pre-Scan]
Click this button to pre-scan the original.
8) [Scan]
Click this button to scan the original.
9) Measurement unit
Select “Inch”, “mm”, or “Pixel” to change the measurement unit.
10)
Click this icon to open the advanced scan dialog.
 P.117 “Advanced scan dialog”
1
2
4
5
6 7 8
3
9
10