2 COPY FUNCTIONS
52 Basic Copy Procedure
Basic Copy Procedure
You can copy the original with various functions. Learn the basic copy procedure in this section. For other functions, see
the following pages.
P.63 “Quick Access to Useful Functions”
P.66 “Advanced Copy Functions”
Before you start the operation:
Make sure that the equipment is ready to copy.
P.27 “Preparation 1 - Turning Power ON”
P.29 “Preparation 2 - Loading Paper”
P.38 “Preparation 3 - Registering Loaded Paper”
When you see an asterisk on the LCD screen:
The equipment has the default setting for each function. When you see an asterisk next to the setting on the LCD screen,
it indicates that you have changed the setting from the default. For the defaults, see the pages below.
P.122 “Functions available in the “MENU” mode”
P.126 “Default Settings”
Acceptable originals
This equipment can accept the following originals.
* This equipment cannot detect the original size automatically. Make sure that the size of the paper to copy is the same as the original size. You
do not set the original size manually except for the “2IN1/4IN1” copy function. When you use the “2IN1/4IN1” function, you need to set the
original size so that the copied pages are automatically reduced to the current paper size setting.
Do not place heavy objects (4 kg/9 lb. or over) on the original glass and do not force it down.
Breaking the glass could injure you.
Maximum number of originals scanned in one go
When you use the “2IN1/4IN1” function or the “FINISHING (SORT/ROTATE SORT)” function, the equipment scans the
original pages in advance. Up to 120 original sheets can be scanned at one time. When the number of sheets to be
scanned exceeds 120 or the built-in memory in the equipment becomes full during the scanning of the copy job, scanning
stops and “MEMORY IS FULL PRESS ANY KEY” appears on the LCD screen. Press any button on the control panel. The
scanned pages are cancelled.
Type
Maximum Size
*
Plain paper
Special media types
Booklets
3-dimensional objects
A3 or LD