1.PREPARATION
Preparation 3 - Registering Loaded Paper 39
1 PREPARATION
7
Press the [SETTING/OK] button.
8
Press the , , , or button to select the size of paper you loaded in the drawer.
The LCD screen below illustrates “A4” is selected.
9
Press the [SETTING/OK] button to exit from the menu.
You are ready to use the selected paper size.
Registering the size and type of paper loaded on the bypass tray
Follow the steps below to register the paper size and type, for example A3 and thick paper (81 - 105 g/m
2
, 21 - 28 lb.
Bond), for the bypass tray.
1
Press the [MENU] button to enter the “MENU” mode.
2
Press the or button to select “PAPER SETTINGS”.
3
Press the [SETTING/OK] button.
4
Make sure that “PAPER SIZE” is selected.
If necessary, press the or button to select it.
5
Press the [SETTING/OK] button.
1
3
DRAWER
FOLIO 8K 16K
B4 B5 B5-R
A3 A4 A4-R
1
3
MENU
DEFAULT SETTINGS
ADVANCED FUNCTION
PAPER SETTINGS
PAPER SETTINGS
PAPER TYPY
PAPER SIZE
CANCEL
To Next Page
Loading...
