Toshiba E-studio18 - Setting the 2 In1;4 In1 Default; Setting the Dual Page Default

5 EQUIPMENT SETTINGS
128 Default Settings
 Setting the 2in1/4in1 default
Set the default setting for the “2IN1/4IN1” copy function as follows.
1
Press the [MENU] button to enter the “MENU” mode.
2
Press the or button to select “DEFAULT SETTINGS”.
3
Press the [SETTING/OK] button to enter the “DEFAULT SETTINGS” menu.
4
Press the or button to select “2IN1/4IN1”.
5
Press the [SETTING/OK] button.
6
Press the or button to select “2IN1” or “4IN1”.
7
Press the [SETTING/OK] button.
8
Press the or button to select the icon that specifies how the pages are arranged on
a sheet.
Two or four options are available respectively for “2IN1” or “4IN1”. For the details about the setting and operation,
see the pages below.
 P.73 “Copying two or four pages on each sheet”
9
Press the [SETTING/OK] button to exit from the menu.
You are finished with the operation in the “MENU” mode. The selected setting becomes active as the default.
 Setting the dual page default
Set the default setting for the “DUAL PAGE” copy function as follows.
1
Press the [MENU] button to enter the “MENU” mode.
2
Press the or button to select “DEFAULT SETTINGS”.
3
Press the [SETTING/OK] button to enter the “DEFAULT SETTINGS” menu.
MENU
1
3
PAPER SETTINGS
DEFAULT SETTINGS
ADVANCED FUNCTION
DEFAULT SETTINGS
2
5
DUAL PAGE
LANGUAGE
2IN1/4IN1
MENU
1
3
PAPER SETTINGS
DEFAULT SETTINGS
ADVANCED FUNCTION