Toshiba E-studio18 - Paper Jams on Bypass Tray; Paper Jam Behind Transfer Unit

6 TROUBLESHOOTING
142 Paper Jams
Do not touch the photoconductive drum.
When you release the paper jammed within the transfer unit or the fuser unit, be careful not to touch the photoconductive
drum. This could stain the copy images.
 Paper jams on bypass tray
1
Pull out the paper jammed on the bypass tray.
2
Check beneath the transport guide in the paper feeding area.
Check if any paper is jammed under the transport guide behind the transfer unit.
 P.142 “Paper jam behind transfer unit”
 Paper jam behind transfer unit
Be careful not to catch your fingers between the equipment and the side cover.
This could injure you.
1
Open the side cover.