Toshiba E-studio18 - Displaying the Total Counter; Displaying the ROM Version

5 EQUIPMENT SETTINGS
136 Other Equipment Functions
5
Press the [SETTING/OK] button to exit from the menu.
You are finished with the operation in the “MENU” mode. The equipment enters the sleep mode.
 Displaying the total counter
Execute “TOTAL COUNTER” to see the number of printed or copied pages as follows.
1
Press the [MENU] button to enter the “MENU” mode.
2
Press the or button to select “TOTAL COUNTER”.
3
Press the [SETTING/OK] button.
The counter appears on the LCD screen.
4
Check the counter and press the [CLEAR/STOP] or [SETTING/OK] button.
y If you press the [CLEAR/STOP] button, you can immediately exit from the menu. You are finished with the
operation at this step.
y If you press the [SETTING/OK] button, you return to the “MENU” layer. Go to the next step.
The LCD screen below shows an example.
5
Press the or button to select [CANCEL] and then press the [SETTING/OK] button to
exit from the menu.
You are finished with the operation in the “MENU” mode.
 Displaying the ROM version
Execute “ROM VERSION” to see the ROM version information as follows.
1
Press the [MENU] button to enter the “MENU” mode.
2
Press the or button to select “ROM VERSION”.
3
Press the [SETTING/OK] button.
The ROM version information appears on the LCD screen.
MENU
2
3
ENTER SLEEP MODE
TOTAL COUNTER
RESTORE DEFAULTS
TOTAL COUNTER
3
3
CANCEL
CLOSE
12345
00012345
MENU
3
3
CLOSE
ROM VERSION