8 SPECIFICATIONS
162 e-STUDIO18 Specifications
e-STUDIO18 Specifications
*1 13”LG size paper can be used only in equipment for the EU and North America.
y These specifications vary depending on the copying conditions and the environment.
y Specifications and appearance are subject to change without notice in the interest of product improvement.
Model name DP-1800
Type Desktop type
Original glass Fixed
Printing (copying) system Indirect electrophotographic method
Developing system 2-component magnetic brush developing
Fusing method 2 halogen lamps
Photosensor type OPC
Original scanning system Flat surface scanning system
Original scanning sensor Linear CIS sensor
Scanning light source LED
Resolution Scanning 600 dpi x 600 dpi
Writing 600 dpi x 600 dpi
Acceptable originals Sheets, books and 3-dimensional objects
Acceptable original size Max. A3 or LD
Acceptable copy paper size Drawer
A3, A4, A4-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, COMP, 13”LG
*1
, 8K,
16K, 16K-R
Bypass A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, ST-R, COMP,
13”LG
*1
, 8K, 16K, 16K-R, COM10, MONARCH, DL, YOU-4, CHO-3
Acceptable copy paper weight Drawer
64 - 80 g/m
2
(17 - 20 lb. Bond)
Bypass
64 - 80 g/m
2
(17 - 20 lb. Bond) : for continuous feed
50 - 163 g/m
2
(13 lb. Bond - 90 lb. Index) : for single feed
Warm-up time Approx. 25 seconds
First copy time (A4 or LT portrait) LT: Approx. 7.4 seconds
A4: Approx. 7.3 seconds
Continuous copy speed See P.163 “Continuous copying speed”
Multiple copying Up to 99 copies
Excluded image width Copy Leading edge: 3.0±2.0 mm (0.12”±0.08”)
Trailing edge: 2.0±2.0 mm (0.08”±0.08”)
Both edges: 2.0±2.0 mm (0.08”±0.08”)
Printer Leading edge: 3.0±2.0 mm (0.12”±0.08”)
Trailing edge: 2.0±2.0 mm (0.08”±0.08”)
Both edges: 2.0±2.0 mm (0.08”±0.08”)
Reproduction ratio Actual size 100±0.5%
Zoom 25 - 400% (in 1% increments)
Storage capacity Max. 250 sheets or until the memory is full (TOSHIBA’s own chart)
Paper supply Drawer
250 sheets (80 g/m
2
, 20 lb. Bond)
Bypass
100 sheets (80 g/m
2
, 20 lb. Bond)
Loading capacity for the receiving tray
Approx. 250 sheets (64 g/m
2
, 17 lb. Bond)
Toner density adjustment Magnetic auto-toner system
Exposure control Automatic plus manual selection from 9 exposure steps
Memory Page memory: 64 MB
USB interface USB2.0 (Hi-Speed)
Environment (for normal use) Temperature: 10 º - 30 ºC, Humidity: 20 - 85% (No condensation)
Power requirements and Power consumption
(including optional equipment)
AC 220-240 V±10%, 3.7 A (50-60 Hz): 1.0 kW or less
AC 120 V±10%, 7.8 A (60 Hz): 1.0 kW or less
AC 127 V±10%, 7.8 A (50-60 Hz): 1.0 kW or less (for Saudi Arabia 100 V
version only)
Dimensions (equipment only) 600 mm (23.6”) (W) x 578 mm (22.8”) (D) x 451 mm (17.8”) (H)
Weight (including equipment and drum) Europe and China: Approx. 30 kg (66.1 lb.)
North America and Other: Approx. 29 kg (63.9 lb.)
Space occupied (equipment only) 948 mm (37.3”) (W) x 643 mm (25.3”) (D)
To Next Page
Loading...
