Toshiba E-studio18 - Setting the Finishing Default

5.EQUIPMENT SETTINGS
Default Settings 127
5 EQUIPMENT SETTINGS
4
Press the or button to select “ORIGINAL MODE”.
5
Press the [SETTING/OK] button.
6
Press the , , , or button to select “TEXT/PHOTO”, “TEXT”, “PHOTO”, or
“BACKGROUND ERASE”.
For the details about the setting and operation, see the pages below.
 P.58 “Changing the original mode to copy”
 P.69 “Adjusting the original mode to the copy”
7
Press the [SETTING/OK] button to exit from the menu.
You are finished with the operation in the “MENU” mode. The selected setting becomes active as the default.
 Setting the finishing default
Set the default setting for the “FINISHING” copy function as follows.
1
Press the [MENU] button to enter the “MENU” mode.
2
Press the or button to select “DEFAULT SETTINGS”.
3
Press the [SETTING/OK] button to enter the “DEFAULT SETTINGS” menu.
4
Press the or button to select “FINISHING”.
5
Press the [SETTING/OK] button.
6
Press the or button to select “NONSORT”, “SORT”, or “ROTATE SORT”.
For the details about the setting and operation, see the page below.
 P.70 “Sorting pages in the same order as the original”
7
Press the [SETTING/OK] button to exit from the menu.
You are finished with the operation in the “MENU” mode. The selected setting becomes active as the default.
DEFAULT SETTINGS
1
5
ORIGINAL MODE
FINISHING
DENSITY
MENU
1
3
PAPER SETTINGS
DEFAULT SETTINGS
ADVANCED FUNCTION
DEFAULT SETTINGS
1
5
ORIGINAL MODE
FINISHING
DENSITY