5.EQUIPMENT SETTINGS
Menu Function 123
5 EQUIPMENT SETTINGS
DEFAULT
SETTINGS
DENSITY AUTO, Manual 9 steps The default setting is set for the density.
P.126 “Setting the density default”
ORIGINAL MODE TEXT/PHOTO
, TEXT, PHOTO,
BACKGROUND ERASE
The default setting is set for the original
mode.
P.126 “Setting the original mode default”
FINISHING NONSORT
, SORT, ROTATE SORT The default setting is set for the finishing
function.
P.127 “Setting the finishing default”
2IN1/4IN1 2IN1
, 4IN1 The default setting is set for the 2IN1 or 4IN1
function.
P.128 “Setting the 2in1/4in1 default”
DUAL PAGE LEFT BINDING
, RIGHT BINDING The default binding position is set for the dual
page copy function.
P.128 “Setting the dual page default”
LANGUAGE ENGLISH, FRENCH, ITALIAN,
GERMAN, SPANISH, IRISH,
BULGARIAN, SLOVAKIAN,
SERBIAN, DUTCH, POLISH,
RUSSIAN, PORTUGUESE, CZECH,
HUNGARIAN, TURKISH,
ROMANIAN, SLOVENIAN,
LITHUANIAN, LATOVIAN,
SIMPLIFIED CHINESE,
TRADITIONAL CHINESE
The default language is set. The default
language and the appearance order vary from
region to region.
P.129 “Setting the language”
TIMERS AUTO
CLEAR
15, 30, 45
, 60, 75, 90, 105, 120, 135,
150, 180, 210, 240, 270, 300 sec.
The default time is set for the auto clear
function.
P.130 “Setting the timers for auto
clearance and energy-saving”
AUTO LOW
POWER
1, 2, 3, 4, 5
, 10, 15, 20, 25, 30, 35, 40,
45, 50, 55, 60, 70, 80, 90, 100, 110,
120, 150, 180, 210, 240 min.
The default time is set for the auto lower
power function.
P.130 “Setting the timers for auto
clearance and energy-saving”
AUTO
SLEEP
1
, 3, 5, 10, 15, 20, 25, 30, 35, 40, 45,
50, 55, 60, 70, 80, 90, 100, 110, 120,
150, 180, 210, 240 min.
The default time is set for the auto sleep
function.
P.130 “Setting the timers for auto
clearance and energy-saving”
DRAWER SET POP-UP ON
, OFF The default action is set for the drawer set
pop-up function. The default setting varies
from region to region:
North America: ON
Other than North America: OFF
P.130 “Setting the pop-up message for
changing paper in the drawer”
JAM RECOVERY MANUAL
, AUTO The default action is set for the jam recovery
function.
P.132 “Setting the jam recovery function”
LCD CONTRAST -3, -2, -1, 0
, +1, +2, +3 The contrast of the LCD screen is set.
P.132 “Setting the LCD contrast”
FUNCTION1 Same options as the menu functions
such as DENSITY
or ID CARD
The selected menu function is assigned to
FUNCTION1. The default setting varies from
region to region:
Other than Europe: DENSITY
Europe: ID CARD
P.133 “Setting the FUNCTION1/2 default”
FUNCTION2 Same options as the menu functions
such as ZOOM
.
The selected menu function is assigned to
FUNCTION2.
P.133 “Setting the FUNCTION1/2 default”
RESTORE DEFAULTS YES All the settings and functions are restored to
the factory defaults.
P.135 “Restoring the defaults”
ENTER SLEEP MODE SLEEP The equipment enters the sleep mode.
P.135 “Entering the sleep mode”
Menu Functions Settings Description and Reference Pages
To Next Page
Loading...
