5.EQUIPMENT SETTINGS
Menu Function 125
5 EQUIPMENT SETTINGS
5
Press the [SETTING/OK] button to enter the setting layer of each setting.
6
Press the , , , or button to select the setting.
7
Press the [SETTING/OK] button.
y If the selected setting has no more options or values to set, the [SETTING/OK] button allows you to exit from
the menu. You are finished with the operation at this step.
y If the selected setting has more options or values to set, the [SETTING/OK] button allows you to do so.
Continue to the next step.
8
Select the options or values as required with the , , , or button.
The options or values vary from setting to setting. For the details, see the page that describes each default setting.
9
Press the [SETTING/OK] button to exit from the menu.
You are finished with the operation in the “MENU” mode.
To Next Page
Loading...
