7 MAINTENANCE AND INSPECTION
160 Regular Cleaning
3
Remove the transfer charger cleaner from the front pocket of the transfer unit.
4
Wipe the transfer charger wire with the transfer charger cleaner.
1) Insert the transfer charger cleaner into the front end of the transfer charger.
2) Push the cleaner onto the front wall, and then check if the cleaner pad has contacted with the transfer charger
wire.
3) Clean the wire from its front end to the other end in two reciprocating motions.
4) Remove the cleaner from the front end of the transfer charger after cleaning.
5
Return the transfer charger cleaner into the cleaner pocket, and then close the transfer
unit.
6
Close the side cover.
To Next Page
Loading...
