Toshiba E-studio18 - Chapter 1 PREPARATION; Description of Each Component

1.PREPARATION
This chapter describes what you need to know before using this equipment, such as how to turn the power on, how to
load paper, how to register the paper size and type, and how to install the printer and scanner drivers.
Description of Each Component...........................................................................................22
Front/Right side....................................................................................................................................................22
Left side/Inner side...............................................................................................................................................23
Configuration of options .......................................................................................................................................24
Control panel........................................................................................................................................................24
Basic screen.........................................................................................................................................................26
Preparation 1 - Turning Power ON........................................................................................27
Turning power ON ................................................................................................................................................27
Saving energy when not in use - Energy saving mode - ......................................................................................27
Preparation 2 - Loading Paper ..............................................................................................29
Acceptable media types .......................................................................................................................................29
Recommended paper...........................................................................................................................................30
Loading paper in the drawer.................................................................................................................................31
Loading paper on the bypass tray........................................................................................................................33
Loading an envelope on the bypass tray..............................................................................................................35
Preparation 3 - Registering Loaded Paper...........................................................................38
Registering the size of paper loaded in the drawer ..............................................................................................38
Registering the size and type of paper loaded on the bypass tray.......................................................................39
Preparation 4 - Installing Printer and Scanner Drivers.......................................................41
System requirements............................................................................................................................................41
Connecting the equipment and the computer ......................................................................................................41
Installing the drivers..............................................................................................................................................41