1 PREPARATION
32 Preparation 2 - Loading Paper
4
Load paper in the drawer.
y The maximum number of sheets that can be placed at one time is 250 (64 to 80 g/m
2
, 17 - 20 lb. Bond). Be
sure that the stack height of paper is not higher than the line indicated at the inner side of the side guide and
trailing guide.
P.29 “Acceptable media types”
y Fan the paper well before loading it in the drawer, otherwise multiple feeding could occur. Be careful that the
paper does not cut your fingers.
y Load the paper face up. You may tell its “face” by the note on its wrapping paper.
5
Move the end guide to the trailing edge of the paper while pushing its lower part in the
direction of the arrows.
Widen the gap with both hands.
6
While holding the green lever of the front side guide, adjust the side guides to the
paper size.
Adjust the side guides with both hands.
To Next Page
Loading...
