1 PREPARATION
36 Preparation 2 - Loading Paper
1
Place an envelope on a flat clean surface and press it with your hands in the arrow
directions as shown below to expel air from the inside.
Press it well to prevent the flap from rolling upward.
Correct bent corners of the envelope.
2
Open the bypass tray.
3
Load the envelope face down on the bypass tray.
Place the envelope with its flap side at the front as shown below.
Do not copy or print on the back of envelopes. This may cause a paper jam or soil them or the inside of the
equipment.
To Next Page
Loading...
