2 COPY FUNCTIONS
56 Basic Copy Procedure
3
Set the paper size and type for the paper source to use.
P.38 “Registering the size of paper loaded in the drawer”
P.39 “Registering the size and type of paper loaded on the bypass tray”
If you set a different paper type from that loaded on the bypass tray, paper jams could occur or the quality of the
copied images could be poor.
4
Select the drawer or the bypass tray to use.
You can change the paper source on the basic setting menu.
1) Press the [SETTING/OK] button to enter the basic setting menu.
2) Make sure that “DRAWER:xx” is selected.
If necessary, press the or button to select it. The choice may be “BYPASS:xx” if it is set as the default. The
variable “xx” indicates the paper size set as the default.
3) Press the [SETTING/OK] button.
4) Press the or button to select “DRAWER:xx” or “BYPASS:xx”.
The variable “xx” indicates the paper size set as the default.
5) Press the [SETTING/OK] button to return to the highest layer of the menu: if you press the [START] button
instead, the equipment starts copying immediately.
When you want to exit from the basic setting menu without changing the setting, select “CANCEL” with the or
button and press the [SETTING/OK] button. You can also exit from the menu layers with the [CLEAR/STOP]
button.
5
Press the [START] button.
The equipment starts copying.
1
READY
AUTO
100%
TEXT/PHOTO
DRAWER:A4-R
To Next Page
Loading...
