3.PRINT FUNCTIONS
Status Monitor 89
3 PRINT FUNCTIONS
* This message appears when you use the manual 2-sided printing feature.
Paper Jam in Printer Please Open Cover And Remove Paper.
Paper Ejection Jam Please Open Cover And Remove Paper.
Paper Size Error Please Set Correct Size Or Cancel Job.
Front Cover Open Please Close Cover.
Side Cover Open Please Close Cover.
Toner Low (Black) -
Black Toner Empty Please Refill Black Toner.
Toner Not Recognized Please Check Toner.
Paper Empty in Drawer Please Add Paper.
Standard Output Tray Paper Full Please Remove Paper.
Main Motor Error Please Contact Service Technician.
Polygonal Motor Error Please Contact Service Technician.
Fuser Error Please Contact Service Technician.
Fatal Error Please Contact Service Technician.
Paper Type Error Please Press Start Key Or Cancel Job.
Memory full Please Press Any Key.
Paper Empty in Bypass tray Please Add Paper.
The front-sided printing has been accomplished.
*
Turn the paper over to print on the back side and put it on the
bypass tray. Then, press start.
Status Icon Printer Status Error Recovery
To Next Page
Loading...
