Toshiba E-STUDIO2006 - ADU Upper Transport Roller

e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A © 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 128
4.11.8 ADU upper transport roller
4.11.9 ADU transport roller
(1) Remove the automatic duplexing unit (ADU).
 P. 4-123 "4.11.1 Automatic duplexing unit
(ADU)"
(2) Remove the ADU lower transport roller.
 P. 4-127 "4.11.7 ADU lower transport
roller"
(3) Remove 4 E rings [1], 2 gears [2], 2 pins [3],
2 pulleys [4], 2 bushings [5], 1 timing belt [6],
and the earth board [7], and then remove the
transport upper roller [8].
Fig. 4-339
Notes:
Be careful of the orientation of the gears [9]
when assembling them.
Fig. 4-340
(1) Remove the automatic duplexing unit (ADU).
 P. 4-123 "4.11.1 Automatic duplexing unit
(ADU)"
(2) Remove 2 springs [1] and then remove 2
ADU transport rollers [2].
Fig. 4-341
[1]
[8]
[3]
[5]
[5]
[4]
[4]
[7]
[6]
[2]
[1]
[1]
[9]
[1]
[2]
[2]