Toshiba E-STUDIO2006 - Firmware Updating with PC Update Tool

e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A © 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
FIRMWARE UPDATING
11 - 8
11.3 Firmware Updating with PC Update Tool
Notes:
Use the PC update tool to do updates if it cannot be done referring to  P. 11-2 "11.2 Firmware
Updating with USB Device".
11.3.1 General description
The PC update tool is used for upgrading the version of the system ROM and the engine ROM for the
equipment. Save the tool to your computer, and connect it to the equipment with a USB cable, then you
can upload the system ROM.
11.3.2 System requirements
Tools introduced in this manual shall be operated under the following systems:
Windows Vista SP2 (x86 / x64)
Windows 7 SP1 (x86 / x64)
Windows 8.1 (x86 / x64)
Windows 10 (x86 / x64)
11.3.3 Preparation
(1) Before using a PC update tool, install the scanner driver of the equipment in a PC.
(2) Add the “.bin” extension to the file name of the firmware to be updated.
Notes:
Be sure to update the BIOS firmware before upgrading the system and engine ROM.
*** Indicates the version number.
Model Firmware File name
20H/23H/25H BIOS firmware T245SY0Z***.bin
23LA T398SY0Z***.bin
23LM/28LM T391SY0Z***.bin
23HA/28HA T393SY0Z***.bin
Model Firmware File name
20L/23L/25L System ROM T242SY0Z***.bin
Engine ROM T241MWW***.bin
20H/23H/25H System ROM T245SY0Z***.bin
Engine ROM T241MWW***.bin
FAX ROM TFAXV***.bin
23LA System ROM T391SY0Z***.bin
Engine ROM TH390MWW***.bin
23LM/28LM System ROM T398SY0Z***.bin
Engine ROM TH390MWW***.bin
23HA/28HA System ROM T393SY0Z***.bin
Engine ROM TH390MWW***.bin