Toshiba E-STUDIO2006 - RADF Jam

e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A © 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND TROUBLESHOOTING
8 - 42
8.3.7 RADF jam
[E714] Feed signal reception jam
[E721] Jam not reaching the read sensor
Classification Error content
RADF jam Feed signal reception jam
Check item Measures
Original empty sensor • Sensor check (Perform the input check: 03-[8]/[B])
• Lever check
• Connector check
• Harness check
RADF board • Board check
• Connector check (PA5)
• Harness check
Parts to be replaced Remark
Original empty sensor
RADF board
Classification Error content
RADF jam Jam not reaching the read sensor
Check item Measures
Transport roller-1 / Transport
roller-2
Clean the transport roller-1 and transport roller-2 if they are stained.
Read sensor • Sensor check (Perform the input check: 03-[8]/[G])
• Connector check
• Harness check
RADF board • Board check
• Connector check (PA4)
• Harness check
Parts to be replaced Remark
Read sensor
RADF board
Transport roller-1
Transport roller-2