6
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved
e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
SETTING / ADJUSTMENT
6 - 33
6.6.3 Sharpness adjustment
If you want to make scan images look softer or sharper, perform the following adjustment. The
adjustment can be made for each of the color modes and original modes independently.
<Adjustment Mode (05)>
Notes:
You have to make adjustment by balancing between moire and sharpness.
<Procedure>
The procedure is the same as that of  P. 6-24 "6.4.2 Density adjustment".
Code Color mode Original mode Contents
8335 Full Color Text The larger the value is, the sharper the image becomes; while
the smaller the value is, the softer the image becomes.
The smaller the value is, the less moire tends to appear.
The acceptable values are 0 to 255 (Default: 128)
8336 Photo
8354 Text/Photo
7430 Black Text/Photo
7431 Text
7432 Photo
7433 Gray Scale -
To Next Page
Loading...
Need help?
General
