Toshiba E-STUDIO2006 - Page 337

6
© 2013-2017 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2006/2306/2506/2007/2307/2507/2303A/2303AM/2803AM/2309A/2809A
SETTING / ADJUSTMENT
6 - 43
(2) Turn the screw while checking the scale position of the label [1].
Fig.6-28
• 1 scale: 1.0 mm.
• Recommended adjustment range of the hinge: ±2.0 mm (when "a" is taken as a center).
Fig.6-29
• The label position when the screw is turned by + or - 2.0 mm scales.
* The line [2] indicates the edge of the RADF cover.
Fig.6-30
-
+
[1]
a
1.0 mm
±2.0 mm
-
+
[2]
[2]
-2.0mm+2.0mm
[2]
0.0mm