e-STUDIO281c/351c/451c © 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 94
248 Paper
feeding
Memory 3
Paper size (bypass feed-
ing/non-standard type)
feeding/widthwise direction
ALL 148/100
<148-
432/100-
297>
SYS Registers the paper
size of bypass feed
(non-standard type) into
[MEMORY 3].
10
249 Paper
feeding
Memory 4
Paper size (bypass feed-
ing/non-standard type)
feeding/widthwise direction
ALL 148/100
<148-
432/100-
297>
SYS Registers the paper
size of bypass feed
(non-standard type) into
[MEMORY 4].
10
250 Mainte-
nance
Service technician tele-
phone number
ALL 0
<32 dig-
its>
SYS A telephone number
can be entered up to 32
digits. Use the [MONI-
TOR/PAUSE] button to
enter a hyphen(-).
11
251 Mainte-
nance
Setting value of PM
counter
ALL Refer to
content
<8 digits>
M <Default>
e-STUDIO281c
UC, EUR:
100,000 JPN: 0
e-STUDIO351c
UC, EUR:
120,000 JPN: 0
e-STUDIO451c
UC, EUR:
150,000 JPN: 0
1
252 Mainte-
nance
Current value of PM
counter Display/0 clearing
ALL 0
<8 digits>
M Counts up when the
registration sensor is
ON.
1
253 Mainte-
nance
Error history display ALL - SYS Displays the latest 20
errors data
2
254 Paper
feeding
LT↔A4/LD↔A3 PRT 0
<0-1>
SYS Sets whether the data is
printed on the different
but similar size paper or
not when the paper of
corresponding size is
not available.
0: Valid (The data is
printed on A4/A3
when LT/LD is
selected or vice
versa.)
1: Invalid (The mes-
sage to use the
selected paper size
is displayed.)
1
255 Paper
feeding
PFP/LCF installation ALL 0
<0-4>
M 0: Automatic
1: PFP single-drawer
type installed
2: PFP dual-drawer
type installed
3: LCF installed
4: Not installed
1
256 Paper
feeding
Paper size setting /LCF ALL EUR: A4
UC: LT
JPN: A4
M Press the icon on the
LCD to select the size.
9
Setting mode (08)
Code
Classifi-
cation
Items
Func-
tion
Default
<Accept-
able
value>
RAM Contents
Pro-
cedur
e
07/04
To Next Page
Loading...
